Home > Windows 7 > Reinstalled Win7 With Same Hardware. Wasn't Getting BSOD Previously.

Reinstalled Win7 With Same Hardware. Wasn't Getting BSOD Previously.

Contents

I thought this might be RAM but I successfully ran MemTest. It is a big job and my cost a lot more than your computer is worth. Thanks again…. However, I did a complete restoration and now I notice the same Windows Update (KB973879) available for installation in today's (9/1/09) updates. have a peek here

Make sure to take a moment and decide how much space to use for the XP partition. Finally reset Bios to factory settings and still get the same Blue Screen error. use drivers from a different mobo? Then after you get a cup of coffee and that completes, then do the same thing for the Rapid Storage Technology Drivers on your thumb drive so you make sure you

Windows 7 Change Motherboard Blue Screen

Mashine's variation on Quenlin's post worked for me too which is fortunate as I am lazy and always looking to cut out steps. Windows 10 has a cloud-based authentication system, so you must install the upgrade before 29 July 2016. If there are any files with .dmp extension, zip the entire folder and upload to any free file hosting site like Mediafire - http://www.mediafire.com/ If you are getting a permission I won't put any links here, just ask google for HBCD version 15.2, d/l it, unpack and use burncdcc tool to create hirens boot cd.

  • Which, maybe, implies that two pieces of hardware are using the same identifiers? –Arjan Nov 21 '10 at 14:42 @Arjan: Interesting!
  • Short answer for blue screening when trying to install Win XP on computers with SATA controller due no SATA drivers for that specific SATA controller on Win XP CD.
  • If your computer repairs great..
  • I have a Samsung r580 (500GB) with Windows 7.
  • Remove CPU from the old motherboard and put it on the new or in my case when I did this I put my new i7 3770 chip on my new (1155)

please advise. Safe mode (Except command prompt, which I didn't try) and other attempts proved hopeless since Windows just wanted to finish the installation. ShablammmJan 24, 2014, 5:05 AM herpderpalot said: Guys. 0x0000007b New Motherboard i can't see any pattern as to what might trigger it.

BTW, your BIOS is similarly old, too. How To Repair Windows 7 After Changing Motherboard Re-installing Windows will not always work. After booting into one of those but when trying to do something like logging in or running an important program? http://superuser.com/questions/211582/unable-to-install-windows-xp-blue-screen-error-pops-up-before-starting-window Windows Updates & Activation Reinstalled Win7 Home Premium - now Win7 won't activate?Hey all, Just did a format on a client's machine that was just given to me.

I never tried to reinstall windows. New Motherboard Startup Repair Any suggestions? Can I download Windows 10 and have both systems on my machine? i have a new HP dv6.

How To Repair Windows 7 After Changing Motherboard

If you want to run two versions of Windows, you have to buy two licences. http://en.community.dell.com/support-forums/desktop/f/3514/t/19661581 Additionally, even if you could find some generic third-party drivers that would allow you to setup a dual-boot configuration on your notebook, you should consider the size of your hard drive. Windows 7 Change Motherboard Blue Screen Search for updates in Razer Support. Changed Motherboard Windows 7 Won't Boot It is a Steel Series Product.

This is so slow it's almost useless.. http://darrenburnhill.com/windows-7/get-aero-with-old-hardware.html The computer started out as a shop bought computer, then moved everything over to a new case (CM Storm Sniper) and added a new graphics card + power supply. Will try to fix later this morning…THANK YOU SO MUCH for posting. Close the cover and start your computer hitting to give you boot options and the ability to boot using your Windows Install Disk. 8. Fix Hdc

Tried to install XP on to it, got message-Setup could not continue newer version of Windows already installed. Flag Permalink This was helpful (0) Collapse - service packs? The initial update just gave me the blue screen. http://darrenburnhill.com/windows-7/dual-boot-win7-win7-restore-points-any-special-considerations.html Anthony Nicki on Wed, 24th Jun 2009 1:03 am Anthony, I recently booted my computer with normal startup (I had it on selective with the anti-virus turned off).

Anthony Ryan on Mon, 13th Jul 2009 1:11 pm @Anthony - I scanned using SFC /Scannow and it found some files that where corrupt and couldn't be fixed, my reason Change Motherboard Without Reinstalling Windows 7 In the case of my Packard Bell desktop, I take the base unit apart on average once every 12 to 15 months, paying particular attention to the fans. Funnily enough, my C drive is already partitioned (into C and D) so l assume l can skip a lot lot of the origian tutorial?.

That is usually a driver issue.

You will undoubtedly notice that the machine is booting directly into XP at this time. by cnetwesser / August 16, 2009 2:27 PM PDT In reply to: Yes! Maybe you have an idea how i can change the hardware acceleration on another way ? Anthony on Tue, 21st Jul 2009 11:50 am @Robin - Normally the hardware acceleration Fix_hdc ENJOY good computing again!

Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion ron Thanks very much for this. Probably D:\ and your thumbdrive is probably E:\..or F:\ (you can change to the drive letters by typing E: or D: and then typing DIR to see what is this contact form Step 3: Select View installed updates in the top left of the window.

Ron Kay I am sooooo upset right now!!! So the best way is to find the real cause of a blue screen error and fix it. […] Tim on Fri, 29th May 2009 6:08 pm Morgan, My BSOD Staples didn't know as much about it as I did. Evan Wondrasek I don't have experience with Trillian, but I use both Pidgin (http://pidgin.im) and Digsby (http://www.digsby.com) which are fantastic multi-protocol instant messengers.

Tried chdsk/P and R - say I have bad sectors unrepairable only does 50% of hard drive then freezes. Three times with two different USB devices, a flash drive, and a card reader. Techerator is now on my favorites list and will be my first stop for technical assistance. I have American Megatrends BIOS and I do not see this parameter anywhere? 2) How do you "slipstream" in the SATA drivers when XP install is loading?

I suppose it could still be the BIOS but I can't seem to switch to anything more recent than the one from 2010? I own a caddy system, i plan to just load each OS onto a caddy drive and slide whatever one i require in to the pc. I have work as a software engineer for many large3 companies, the last two were Computer Sciences COrporation and Verizon. If you do not activate in the 3 day period, then you may have to call Microsoft and explain that you swapped out your Motherboard and you need them to allow

Stop: 0x00000050 ( 0xE3AA9000, 0x00000000, 0x80560F58, 0x00000001) Anthony on Thu, 20th Aug 2009 11:34 am @geo - Did you try the memory test as recommended in comment #94? Then after you get a cup of coffee and that completes, then do the same thing for the Rapid Storage Technology Drivers on your thumb drive so you make sure you As I said this tutorial rox! Was having the same problem on my Dell 14z.